-
Shimpo Pug Mill NVS-07
Motor : 1 HP
Extruding Capacity: 730 lbs.
Max Batch Capacity: 55 lbs.
Nozzle Diameter: 3.5″
200W Oil-Free Vacuum System
Weight: 310 lbs.$5,250.89Shimpo Pug Mill NVS-07
$5,250.89 -
CRAFT ‘SMART’ 60 Kiln Furniture
Firing Capacity: 60 litres (2.1 cu/ft).
Maximum Temperature: 1300°C (Cone 10)
Chamber Dimensions: 430mm wide x 395mm deep
External Dimensions with frame and castors: 600mm wide x 810mm / 910mm high
Kiln Shelf Diameter: 370mm to 380mm
Weight: 69kgs
Power: 4.0kW
Amp Draw: 16 Amps – supplied with a 20 Amp 3-pin plug$5,343.00$6,230.00CRAFT ‘SMART’ 60 Kiln Furniture
$5,343.00$6,230.00 -
Peter Pugger PM-50
Electrical: 240V 1P, 16A Max Capacity: 135 lbs. Pugging Rate: 1200 lbs. per hour Mixing Rate: 300 lb/s per hour Dimensions: 46″L x 20″W x 30″H Hopper Opening: 9″ x 9″ Pug Size: 3″ round Shipping Weight: 400 lbs.
$5,755.12Peter Pugger PM-50
$5,755.12 -
Glass Kiln
Glass Kilns (photo is of the Glass 27)
Available in a range of sizes from:
228mm Hight, 340mm Wide, 340mm Deep (Glass table top 2 – using a standard power point)
up to 460mm Hight, 1400mm Wide, 560mm Deep (Glass 27)
$6,120.00Glass Kiln
$6,120.00 -
FIRED UP 50 Kiln Furniture Set
Firing capacity: 50 litres (1.7 cu ft).
Maximum Temperature: 1300°C
Chamber dimensions: 380mm wide x 380mm deep x 340mm high
Weight: Approx 85kgs
Power: 3.9 kW
Supply required: Single Phase – 20 amps
Kiln Shelf size: 350 x 350mm
Standard Controller: ST315C$6,120.00$7,354.00FIRED UP 50 Kiln Furniture Set
$6,120.00$7,354.00 -
NABERTHERM TOP 60L KILN
The Nabertherm TOP60 pottery kiln is the perfect kiln for your hobby or workshop. The kiln has an attractive design, and good firing results are just a few of the advantages. With 60 Litre capacity, this model is an excellent choice for your first kiln as well as for small schools.
Three-layer insulation with light refractory bricks and high quality, energy saving backing insulation.
Top quality heating elements, optimum wire gauge and length for long life
Rapid switching cycles result in precise temperature control.$6,233.00$7,650.00NABERTHERM TOP 60L KILN
$6,233.00$7,650.00 -
-
VPE-8SS #25 Power Extruder Sin
Dimensions: 48″L x 16″W x 21″H
Hopper Door Size: 5 1/4″ x 5 1/4″
Electrical: 1/2 HP 1P, 8 amps at 120V, 4 amps at 240V
Extrusion Chamber: 8″ x 19.10″
Cylinder: 2.5″ x 18″
Weight: 320lbs. (Horizontal) 90lbs. (Power Pack)$6,899.99VPE-8SS #25 Power Extruder Sin
$6,899.99 -
VPE-8SS #50 Power Extruder Sin
Dimensions: 61.25″L x 16″W x 21″H
Hopper Door Size: 5 1/4″ x 5 1/4″
Electrical: 1/2 HP 1P, 8 amps at 120V, 4 amps at 240V
Extrusion Chamber: 8″ x 27.86″
Cylinder: 3″ x 24″
Weight: 320lbs. (Horizontal) 90lbs. (Power Pack)$7,325.00$9,449.00VPE-8SS #50 Power Extruder Sin
$7,325.00$9,449.00 -
Peter Pugger PM-100
Electrical: 240V 1P, 24A Max Capacity: 250 lbs. Pugging Rate: 2000 lbs. per hour Mixing Rate: 600 lb/s per hour Dimensions: 58″L x 24″W x 31″H Hopper Opening: 9″ x 9″ Pug Size: 4″ round Shipping Weight: 600 lbs.
$7,533.87Peter Pugger PM-100
$7,533.87 -
-
Soldner Clay Studio Mxr41
Soldner Clay Mixers where developed by Paul Soldner. Soldner Clay Mixers are manufactured in the United States of America and possess the same quality for the last 30 years. The majority of Soldner clay mixers are still in operation, even some of the earliest models. Every effort is made to insure this same quality in…
$7,906.66Soldner Clay Studio Mxr41
$7,906.66
Shop By Category
