-
Peter Pugger PM-100
Electrical: 240V 1P, 24A Max Capacity: 250 lbs. Pugging Rate: 2000 lbs. per hour Mixing Rate: 600 lb/s per hour Dimensions: 58″L x 24″W x 31″H Hopper Opening: 9″ x 9″ Pug Size: 4″ round Shipping Weight: 600 lbs.
$7,533.87Peter Pugger PM-100
$7,533.87 -
VPE-8SS #50 Power Extruder Sin
Dimensions: 61.25″L x 16″W x 21″H
Hopper Door Size: 5 1/4″ x 5 1/4″
Electrical: 1/2 HP 1P, 8 amps at 120V, 4 amps at 240V
Extrusion Chamber: 8″ x 27.86″
Cylinder: 3″ x 24″
Weight: 320lbs. (Horizontal) 90lbs. (Power Pack)$7,325.00$9,449.00VPE-8SS #50 Power Extruder Sin
$7,325.00$9,449.00 -
VPE-8SS #25 Power Extruder Sin
Dimensions: 48″L x 16″W x 21″H
Hopper Door Size: 5 1/4″ x 5 1/4″
Electrical: 1/2 HP 1P, 8 amps at 120V, 4 amps at 240V
Extrusion Chamber: 8″ x 19.10″
Cylinder: 2.5″ x 18″
Weight: 320lbs. (Horizontal) 90lbs. (Power Pack)$6,899.99VPE-8SS #25 Power Extruder Sin
$6,899.99 -
-
NABERTHERM TOP 60L KILN
The Nabertherm TOP60 pottery kiln is the perfect kiln for your hobby or workshop. The kiln has an attractive design, and good firing results are just a few of the advantages. With 60 Litre capacity, this model is an excellent choice for your first kiln as well as for small schools.
Three-layer insulation with light refractory bricks and high quality, energy saving backing insulation.
Top quality heating elements, optimum wire gauge and length for long life
Rapid switching cycles result in precise temperature control.$6,233.00$7,650.00NABERTHERM TOP 60L KILN
$6,233.00$7,650.00 -
FIRED UP 50 Kiln Furniture Set
Firing capacity: 50 litres (1.7 cu ft).
Maximum Temperature: 1300°C
Chamber dimensions: 380mm wide x 380mm deep x 340mm high
Weight: Approx 85kgs
Power: 3.9 kW
Supply required: Single Phase – 20 amps
Kiln Shelf size: 350 x 350mm
Standard Controller: ST315C$6,120.00$7,354.00FIRED UP 50 Kiln Furniture Set
$6,120.00$7,354.00 -
Glass Kiln
Glass Kilns (photo is of the Glass 27)
Available in a range of sizes from:
228mm Hight, 340mm Wide, 340mm Deep (Glass table top 2 – using a standard power point)
up to 460mm Hight, 1400mm Wide, 560mm Deep (Glass 27)
$6,120.00Glass Kiln
$6,120.00 -
Peter Pugger PM-50
Electrical: 240V 1P, 16A Max Capacity: 135 lbs. Pugging Rate: 1200 lbs. per hour Mixing Rate: 300 lb/s per hour Dimensions: 46″L x 20″W x 30″H Hopper Opening: 9″ x 9″ Pug Size: 3″ round Shipping Weight: 400 lbs.
$5,755.12Peter Pugger PM-50
$5,755.12 -
CRAFT ‘SMART’ 60 Kiln Furniture
Firing Capacity: 60 litres (2.1 cu/ft).
Maximum Temperature: 1300°C (Cone 10)
Chamber Dimensions: 430mm wide x 395mm deep
External Dimensions with frame and castors: 600mm wide x 810mm / 910mm high
Kiln Shelf Diameter: 370mm to 380mm
Weight: 69kgs
Power: 4.0kW
Amp Draw: 16 Amps – supplied with a 20 Amp 3-pin plug$5,343.00$6,230.00CRAFT ‘SMART’ 60 Kiln Furniture
$5,343.00$6,230.00 -
Shimpo Pug Mill NVS-07
Motor : 1 HP
Extruding Capacity: 730 lbs.
Max Batch Capacity: 55 lbs.
Nozzle Diameter: 3.5″
200W Oil-Free Vacuum System
Weight: 310 lbs.$5,250.89Shimpo Pug Mill NVS-07
$5,250.89 -
Peter Pugger VPM-7SS 120V 1P
Electrical: 120V 6A Max Capacity: 14 lbs. Pugging Rate: 350 lbs. per hour Mixing Rate: 100 lbs. per hour Dimensions: 33.5″L x 12″W x 13.75″H Hopper Door Size: 4.5″ x 4.5″ Pug Size: 3″ round Shipping Weight: 149 lbs.
$5,162.34Peter Pugger VPM-7SS 120V 1P
$5,162.34 -
Shop By Category
